Electronics

Welding is the process of combining two different metals with electrical charges. Welding process of welding the battery provides a contact with a high degree of accuracy. Welding is done without extreme heating. Used to produce cars, PC boxes, microwave ovens, etc. electrodes serve three different purposes. With the transfer of power, maintaining the solid material. Also the unit of heat the material to cool properly. They usually work with ferrous materials.

When using the vehicle, a part of it is often broken. If you know the ways of the welder battery, you can enjoy a range of repair work, without wasting any more time or money. You can use car batteries to make them simpler. You may also need 2 pairs of jumper cables, pliers, wire glasses and a pair of blacks heavy gloves.

First you need to collect stacks 2-3 and placed beside the other. Connect the negative terminal of the first battery to the positive terminal of the second and the negative terminal of the second battery to the positive terminal of the third. This should be done with jumper cables. Now that you have produced a battery of 36 volts.

Connect the second pair of jumper cables between the parts to be welded and the positive terminal of the first battery with the negative battery terminal of the third lever with your pliers. So half of the work to produce its own place is the battery welder.

Place the welding rod in the jaws of the clamp lock. Now you are ready for welding and repair of your desired material. Remove any dirt or dust in the piece. Wearing glasses and gloves, welding with the utmost care for your battery spot welder in hand.